Made in the USA. RSS Waterproof Seam Banding is made from the same polyethylene waterproofing material as our membrane with spun polypropylene anchor webbing on both sides to anchor the Banding into the mortar. Our seam banding is 5” wide.
It is used to create a vapor and waterproof barrier to protect the integrity of building structures from moisture, mold, and decay, and is generally used for tiled surfaces of showers, steam rooms, and wet rooms.
RSS Waterproofing Seam Banding is installed to the change of planes (where the wall meets the floor or where two walls meet to form an edge or corner) in wet areas and where the edges of the membrane meet if they are not overlapped a minimum of two inches. It is also used when two waterproof components meet. Such as an RSS TRC or RSS Tile Ready Bench that meets the surface of an RSS HD Pan or walls.
Tiles can be installed directly onto RSS Waterproofing Seam Banding using a layer of modified or unmodified Thinset.
RSS HD Waterproof Banding
- Material: polyethylene with spun polypropylene anchor webbing
- Dimensions: 5”X50 LF. | 5”X100 LF.